Details
VIPER V2.0 UPDATED VERSION, HUGE BODY FOR A GREAT CARRYING ABILITY
Introducing our First Gen-V FPV/UAV Aircraft, NOW UPDATED
3.00m Flying Wing.
Breaks down to 3 pieces of 900mm (Max)
Payload 2-2.5kg
Airframe can be hand launched or bungeed.
Using our new XF build technology in conjunction with S.G.S the kit has 8 main parts to complete the airframe and all of the hardware (Steel tubular spar and sleeving, wing securing mounts and bolts, horns push rods etc.)
We even supply all of the covering (Carbon look vinyl) and decals
NOTE: I thought when covering our protos with vinyl lt was going to be a pain (not ever having done it before), but i covered the whole aircraft in less than 3 hours, with the use of a hairdryer, it is possible to pull the vinyl completely around the compound curves of the fuselage. I think due mostly as the vinyl we supply is drape vinyl, so with a small amount of heat its very easy to do. Also it adds a huge amount of strength to the airframe with minimal added weight. 9oz over the whole ship.
Introducing our First Gen-V FPV/UAV Aircraft
2.75m Flying Wing.
Breaks down to 3 pieces of 900mm (Max)
Payload 2-2.5kg
Requires:-
2 x 16g+ Metal geared servos
3542 800kv Motor or equivalent (able to turn a 12x6 to 14x8 prop, payload dependent)
80A+ ESC
4s cells (motor dependent)
We are flying ours on 4s 2 x 5000mah cells & 13x7 prop.
This gives us a flight time of about 35mins (you dont need full throttle apart from launch)
WOT gives 18mins
The aircraft is capable of carrying 4 sets of 4s 5000's, but this affects the payload space.
With its incredibly low drag and stability, loiter (for us) is about 1/4 throttle at around 35mph
Cruise is around 50mph 2/3rd throttle
WOT is about 75mph
These figures have been taken over all the testing from our onboard telemetry.
You can see the development from idea to final revision in our forum HERE
Additional Information
| Build Time | 6 - 8 Hours |
|---|---|
| Building Skill | Novice |
| Wing Span | 2750 mm |
| Length | 800mm |
| AUW | 3kg (Bare Airframe) + up to 2kg payload capability |
| Number of engines | 1 |
| Power System Required | Pusher 28-36mm Brushless |
| Generation | GEN-V PRO |
| Minimum Flying Skill | Novice |
| Kit Includes | CNC Cut Parts, Decals, Full Hardware, Laser Cut Parts |
- Be the first to review this product
WRITE YOUR REVIEW
Write Your Own Review
Generation - V Manufacturing
What this means to you is that with the joining of 2 companies technologies, makes your new kit, some of the most advanced and easy to build models around.
Our company mission is not to produce ARTF kits per-say, as the Chinese are rattling out the same kits worldwide, with errors in scale and simplified to give the impression of the real thing, subsiquently the scale lines are compromised (With this noted, there are some very good ones out there). What we do is make unique models, not available from the usual outles. This allows you the builder to make this your own project, and not be one of the masses, where your model is identical to the other 3 on your flightline at any given time.We want to keep you the builder in the loop, to be creative and unique without the heartache of a 6 month build. 95% of our kits are designed to be built in a week of evenings, some of the smaller ones in just a few hours.
Look for the 'Generation - V' logo for all our new or updated models.
ONLY the new or updated models will have this embem in them!
This is a static CMS block displayed if category is empty. You can put your own content here.
