Currency:
Search
Released

GAD/EJC Subject Sigma V2.1 (upated firmware)

GAD/EJC Subject Sigma V2.1 (upated firmware)

1 Review(s)

GAD/EJC Subject Sigma V2.0 Pro Level Gear and LED sequencer


RELEASED


Unit comes with:-


2 x Hyperbright Nav LED modules


2 x Hyperbright Nav Landing Lights LED modules


2 x Hyperbright Strobe LED modules


1 x Hyperbright Rotating LED module


2 x Hyperbright Adjustable Afterburner ring lights


1 x JST connector for the 3s cells input to lights


4 x Double ended Sigma to Rx cables


Turn your 6 or 7ch Tx into a 14ch Tx with only 2 or 3 switches to control up to 9 LED channels (7 nominal 2 jumperable) & up to 9 Servo channels (7 nominal 2 jumperable)


To be clear, you can have 9 on LED and 7 on servos OR 7 on LEDs and 9 on servos, the 2 jumperable channels can only work for LEDS OR SERVOS, not both, so you still have 14 added Sigma channels in use at any one time.


NOTES FOR USE (What aircraft can i use this unit on???)


Here we have 3 examples of what aircraft we have fitted it to!


1: Our new DC-3 (60" model) - Sigma set to default (out of the box with no adjustments) model Warbird (prop/warbird).


      Retracts set to mode 2 (seperated, for that delayed and deployment and retraction, real-feel)


      Navs, rotating lights, No strobe (not befitting of the aircrafts age), no engine lights used (to complex at that size) & landing lights


      Aux channnels - Servo slow selected to actuate the tow release cable when used as a tug (quite regularly)


      6 channel mode selected (as used on a 7ch Tx) so that we have another spare channel for flaps


2: Our up and coming TSR-2 90mm EDF - Sigma set to default EDF mode


    Retracts set to mode 3, doors open, gear down (seperated and timed) 2 set of doors close (nose doors and main secondary doors remain open)


    Gear up - all closed then open, gear goes up (seperated again and timed) , all doors close


    Dual Nav lights (flashing - mode 2), 2 x rotating lights, landing lights are switch selectable(not auto, as is 6ch mode where they come on as the gear goes down)


    2 x Afterburner rings


    Aux channels Servo slow selected for airbrakes.


   7 channel mode used


3: Mish Mash - We used a combination of settings on a Avonds Turbine F-15


    Mode - 2 retracts (doors open, gear down, doors closed - doors open, gear out, doors closed) on 'air valve' setting(no sweep, just end to end instantly)


   All the LED channels inc 2  x Hyperbright Afterburner rings (bespoke made with 160 LEDS)


   Aux channel set to ABS (Anti-lock breaking) on 'air valve setting'


   Servo rail jumper pulled to isolate the Sigma from the rest of the radio (turbine model using higher voltage than 5v - added safety feature)


It is also worth noting that as you have 4 model memories, the gear position is memorised, so as long as you select the model associated to the aircraft you are flying all the setting are saved, but more importantly, where your gear was set last time you used it, (this stops you switch on the model and it throwing itself on the floor because you have the gear switch in the wrong place!      ANOTHER ADDED SAFETY FEATURE!!!


Please visit our FORUM , by clicking :-  HERE


All the information including pictures and videos are in that thread, as there is FAR too much to list in its entirety here.

Customer Reviews

1 Item(s)

per page
Love my Sigma Review by R.Tolling
Had my Sigma now for 3 months. It was a little weird to start with understanding all the features, but once i actually READ the manual, it can do so many things.

I have it installed in a 89" scratch built Lancaster, moving turrets, engine lights, landing lights, sequenced gear doors for the mains.

I have only had to call GAD once to get an understanding of how the turrets work, they were helpful and made it clear for me.

Since it has been in service, it has never let me down, in fact i think it saved my aircraft when one gear servo went down and it isolated the power supply so i could land it safely.

+5 for excellent product! will def use again.

-1 for manual not being as clear as it should be (IMHO) for some of us non-electronic people.

Overall - Excellent, will buy another for my next project!

Tim. (Posted on 04/04/2013)

1 Item(s)

per page

Write Your Own Review

You're reviewing: GAD/EJC Subject Sigma V2.1 (upated firmware)

This is a static CMS block displayed if category is empty. You can put your own content here.

This option is to comply with EU legislation regarding cookies from websites. We would like to place cookies on your computer to help us make this website better.

Its worth noting that All carts NEED cookies to process orders, also data colected on this website will not be sold or used for any other purpopse but to improve your experience.

Please select an option below, you can changes these settings at any time on th bottom of the page.

Allow Cookies Refuse Cookies Close